Makes painting easy with a smooth, even surface, resulting in a beautiful finish.
Convenient to use.
Smooth plaster, easy to polish, and low dust.
Product
Skim Coat
Standard
White 219 THB/bag.
Grey 199THB/bag.
Features
• Smooth plastering and easy polishing.
• Helps make painting easier and results in clearer, more vibrant colors.
• Weather-resistant
• Suitable for bare walls, concrete surfaces, freeform walls, and precast walls.
Usage
• Apply for finishing concrete structures, precast concrete panels, general plastered walls, wall and floor surfaces,
and detailing square columns and pilasters. Suitable for both exterior and interior use.
• Mix 20 kg of Skim Coat (1 bag) with 8.5-9.5 liters of clean water. Mix the Skim Coat with clean water to achieve a suitable consistency. Use a low-speed drill to blend until uniform. Apply with a steel trowel to reach a thickness of 1-2 mm. Once the plaster is slightly damp, brush water over the joint lines, then smooth the surface with the trowel for a flat finish. Allow the plaster to dry for about 4-6 hoursbefore sanding it with sandpaper. Use a damp sponge to clean off any dust, then leave it to dry completely. The recommended usage rate is 1.0-1.2 kg per square meter, with an approximate thickness of 1 mm, as per standard guidelines before painting.
Skim Coat
Premium
White 259THB/bag
Grey 229THB/bag
Features
• Smooth plastering and easy polishing.
• Helps make painting easier and results in clearer, more vibrant colors.
• Weather-resistant
• Suitable for bare walls, concrete surfaces, freeform walls, and precast walls.
Usage
• Apply for finishing concrete structures, precast concrete panels, general plastered walls, wall and floor surfaces,
and detailing square columns and pilasters. Suitable for both exterior and interior use.
• Mix 20 kg of Skim Coat (1 bag) with 8.5-9.5 liters of clean water. Mix the Skim Coat with clean water to achieve a suitable consistency. Use a low-speed drill to blend until uniform. Apply with a steel trowel to reach a thickness of 1-2 mm. Once the plaster is slightly damp, brush water over the joint lines, then smooth the surface with the trowel for a flat finish. Allow the plaster to dry for about 4-6 hoursbefore sanding it with sandpaper. Use a damp sponge to clean off any dust, then leave it to dry completely. The recommended usage rate is 1.0-1.2 kg per square meter, with an approximate thickness of 1 mm, as per standard guidelines before painting.
Storage Instructions
Store in a dry place with no moisture and ensure the temperature does not get too high.
The product has a shelf life of one year from the manufacturing date when kept in a sealed container in a dry place.
Precautions
After mixing with water, the mixture should be used within 40-60 minutes for optimal results.
The product contains cement, which may cause irritation. Always handle with care and wear protective equipment as needed.
If the product gets into your eyes, rinse immediately with clean water. If irritation persists, seek medical attention promptly.
Surface Preparation
For new concrete surfaces, allow them to dry for at least two weeks before applying. This ensures better adhesion and proper curing.
The surface treated with BM SKIM COAT must be strong, clean, and free from cement dust, paint, or grease stains to ensure proper application and adhesion. Proper preparation is key to achieving a smooth,
durablefinish.
If the old concrete surface is peeling or crumbling, it is recommended to apply a primer for old concrete
to improve adhesion before applying BM SKIM COAT.
or concrete surfaces with excess ridge marks from formwork, it is recommended to chisel or prepare the joints to remove any thick protrusions. This will help ensure a smoother and more even surface for the application of BM SKIM COAT.
For large cracks or holes in the surface, it is recommended to repair the area first before applying BM SKIM COAT. This ensures a smoother and more stable finish.
Before starting the application, lightly dampen the surface to be coated with water. This will help improve adhesion and ensure a smoother finish.
Contact us
BEZEN CO.,LTD
99/305 Ratchaphruek Bangkrang,
Muang Nonthaburi, Nonthaburi 11000
Tel : 02-422-5981 Fax : 02-422-5980
Facebook : Bezen Porcelain Ceramic Tiles
Line : @bezen